The MB-450-FH Cast Jaws Coil Spring Trap is a #1 1/2 size trap that is built to hold the meanest, baddest coyote. The outside jaw spread is 5" and the inside jaw spread is 4 3/8". The MB-450-FH has 5/16" thick smooth closed cast jaws. Its features include a Paws-I-Trip pan system with a night latched dog, heavy levers, .135 diameter American made music wire springs, #2 USA made chain, crunch proof swivels, and a 2 piece gusseted frame for strength and reliability.

The MB-450-OS Cast Offset Jaws Coil Spring Trap has all the features of its closed jaw brother including: Paws-I-Trip Pan system with the night latched dog, heavy levers, music wire springs, crunch proof swivels and a 2 piece gusseted frame for strength and reliability. This is the trap that the live catch market has been waiting for.

The MB-450-FOX Cast Jaws Coil Spring Trap has all of the features of the MB-450-FH except lighter .125 diameter American made music wire springs and three crunch proof swivels in the chain instead of two. This FOX version was built upon request from some of the nations top fox men.

The MB-550-CL Double Coil Spring Cast Closed Jaws Trap is designed for use in taking coyote, bobcat, fox and raccoon. This trap has an outside jaw spread of 5 1/2" and an inside jaw spread of 4 3/4". The cast jaw face is 3/8" thick. This trap has a Paws-I-Trip pan system and a night latched dog. Pan tension out of the box (un-waxed) runs an average of 2.1 pounds. Note: If you are not planning on 4-coiling your MB-550-CL's it is strongly recommended that you cut the excess spring pins off leaving 1/2" protruding from the frame.

The MB-550-RC Double Coil Spring Cast Offset Jaws Trap is designed for use in taking coyote, bobcat, fox and raccoon. This trap has an outside jaw spread of 5 1/2" and an inside jaw spread of 4 3/4". The cast jaw face is 3/8" thick and the offset is 3/16". This trap has a Paws-I-Trip pan system and a night latched dog. Pan tension out of the box (un-waxed) runs an average of 2.1 pounds. This trap is fast and excellent results were obtained using the double coil model during an extensive 3 year testing period on coyote, bobcat, red fox, grey fox and raccoon. This trap is an excellent live market trap as well as the trap to use on a mixed species line. It is small enough for fox and tough enough for the nastiest coyote. Note: If you are not planning on 4-coiling your MB-550-RC's it is strongly recommended that you cut the excess spring pins off leaving 1/2" protruding from the frame.

The MB-550-RJ Double Coil Spring Rubber Padded Jaws Trap is designed for use in taking coyote, bobcat, fox and raccoon. This trap has an outside jaw spread of 5 1/2" and an inside jaw spread of 4 3/4". This trap has a Paws-I-Trip pan system and a night latched dog. Pan tension out of the box (un-waxed) runs an average of 2.1 pounds. Note: If you are not planning on 4-coiling your MB-550-RJ's it is strongly recommended that you cut the excess spring pins off leaving 1/2" protruding from the frame.

The MB-550-CL Four Coil Spring Cast Closed Jaws Trap has an outside jaw spread of 5 1/2" and an inside jaw spread of 4 3/4". The cast jaw face is 3/8" thick. This trap has a Paws-I-Trip pan system and a night latched dog. Pan tension out of the box (un-waxed) runs an average of 3.1 pounds. Due to the additional power provided by the 4 coiling, this trap is not recommended if grey fox is your target animal.

The MB-550-RC Four Coil Spring Cast Offset Jaws Trap has an outside jaw spread of 5 1/2" and an inside jaw spread of 4 3/4". The cast jaw face is 3/8" thick and the offset is 3/16". This trap has a Paws-I-Trip pan system and a night latched dog. Pan tension out of the box (un-waxed) runs an average of 3.1 pounds. Due to the additional power provided by the 4 coiling, this trap is not recommended if grey fox is your target animal.

The MB-550-RJ Four Coil Spring Rubber Padded Jaws Trap has an outside jaw spread of 5 1/2" and an inside jaw spread of 4 3/4". This trap has a Paws-I-Trip pan system and a night latched dog. Pan tension out of the box (un-waxed) runs an average of 3.1 pounds. Due to the additional power provided by the 4 coiling, this trap is not recommended if grey fox is your target animal.

Just dye and wax these traps and they're ready to go! Virtually anything that could be done to make this trap coyote proof is wrapped up here in one neat package. The MB-650 OS trap is heavy-duty from top to bottom and comes with 1/4" offset jaws and a 6 1/8" inside jaw spread. This custom made trap is 4-coiled, baseplated, center swiveled and has an extra heavy-duty oversize pan which provides for a huge kill area. The pan tension is adjustable with a #10 pan bolt. Both heavy jaws are held down by a special trigger system which will keep any animal from flipping up a loose jaw. The dog has a "step-down" notch milled into it that gives you an audible click when you are lowering the pan. The MB-650 OS traps have MB Crunch Proof Swivels and heavy duty American made chain. The standard jaw model is for those that want to do their own laminating. Due to the very strong springs, use of the MB-650 laminated is encouraged.

Outside laminated version of the MB-650 Offset Jaws Coyote & Bobcat Coil Spring Trap. The inside jaw spread is still 6 1/8".

The MB-650-C has the same adjustable pan system, frame, heavy-duty springs, chain & swivels as the original MB-650. The similarities stop at the jaws, however, as the MB-650-C sports super-heavy 3/8" thick, 1/4" offset positive locking malleable cast jaws, with a 5 7/8" inside jaw spread. A real coyote catching machine!

Check out these features of the MB-750 Beaver Trap. 7 1/4" jaw spread -- equivalent to the largest trap currently being made for beaver. 4-coiled for strength, speed and stability. Both jaws held down by a special trigger system preventing beaver and otter from flipping up the loose jaw. Compact and extremely easy to bed in tight areas. Perfect for under ice platform sets. Heavy-duty frame with an additional 3/16" baseplate and D-ring. Heavy #10 brass bolt and nut for easy pan tension adjustment. Extra-heavy chain with MB Crunch Proof swivels at D-ring and chains' end.

Offset version of the MB-750 Beaver Coil Spring Trap.

Finally a coilspring trap that will stand up to abuse by either wolf or cougar that you can actually afford to buy. The MB-750 "Wolf" has the same heavy frame and jaws as the MB-750 "Beaver" plus extra heavy music wire springs and a super heavy-duty wolf swivel with welded rivets coming off the D-ring baseplate. 1/4" offset jaws with 3/16" thick x 1/2" wide flat lamination strips are standard equipment. As most "Wolfers" prefer to develop their own chain setups, the MB-750 "Wolf" comes with no chain.