Barker's Body Grip Mount Brackets are used to hold body grip type traps. These Body Grip Mounts are made of steel and have three holes located down the center to permit fast, easy fastening. They are used by first nailing to a limb, log, tree, board or stake where you want to locate the trap. Then, set the trap in the normal manner except let the jaws close onto the Body Grip Mount. The trap is then held solidly in position until it is sprung. It can not tip, slide sideways, fall over or be knocked over. This is a low cost, long life, highly effective device that will enable you to set more traps in the exact position you want them in less time. Body Grip Mount I is for #110/#120 sized body grip traps Body Grip Mount II is for #160/#220 sized body grip traps Body Grip Mount III is for #280/#330 sized body grip traps

The MB Coni Bracket is a handy little bracket that can be nailed to a tree, board, etc. or welded on a stake or lag bolt. When nailing to wood, just bend the flange down with pliers and you have two holes to nail through. Dozens of uses. For 110, 120, 160 & 220 body grippers.

Killer Clips are highly effective and easy to use mounting brackets for body grip traps. Killer Clips work with all sizes of body grip traps.

The Screw-In Stakealizer is perfect for those log crossing sets and can also be used on trees, boards, etc.

Snuggy Body Grip Mounts are made of plated black spring steel. They fit all brands of body grip traps and give you the versatility to mount your body grip traps about anywhere. They are available in 2 different sizes. The first size fits #110 thru #160 sized body grip traps and is available with or without a 1 3/4" mounting screw. The second size fits #330 sized body grip traps.

HAGz Spring Clips are simple, non-intrusive devices that were originally designed for the water trapper to stabilize body grip traps. They are available in two sizes. The standard size is for stabilizing 160 sized and smaller body grip traps on 3/8" rods. The XL size is for stabilizing 220 to 330 sized body grip traps on 1/2" rods. Simply insert the HAGz Spring Clip between the spring coil where it remains always attached so you never lose it, and then slide it onto the rod. HAGz Spring Clips are small and non-intrusive. Each clip is very light and doesn’t restrict the use of the spring eye. These spring clips are fast and efficient: no need to find the perfect stick that the spring eye will fit over. When you combine the HAGz Spring Clip with the HAGz Bracket you are ready for many new body grip trap setting opportunities. Simply attach the HAGz Bracket and insert the HAGz Spring Clip between the spring coils. You can use this set up on a rod, on a stick, on rocks, etc. Sold in dozen packs.

HAGz Brackets are multi-use devices originally designed for the water trapper to stabilize virtually any foothold trap anywhere you mount it. Plus, they work as stake swivels or slide locks. HAGz Brackets unleash new setting opportunities, improve efficiency and reduce overall cost. When combined with the HAGz Spring Clip, you can also stabilize 160 sized body grip traps and smaller. HAGz Brackets use your traps frame ends inserted into one of the appropriate slots to stabilize your traps. They are always attached to your traps so you never lose or forget them. HAGz Brackets can be used for adjustable height sets on 3/8” rod and they can also be attached horizontally or vertically to virtually any object (stick, bamboo, stake, log, rock, float, etc.). They can be welded to a stake or lag bolt or, with the multiple holes and slots, they can be secured with wire, screws, nails, etc. Sold in dozen packs.

HAGz Bait Holders are for use on 3/8” smooth rods to hold your favorite bait, predominantly for baited muskrat sets. Simply squeeze the lever to open, slide onto a 3/8” rod to your desired height and release. Simple one handed adjustment to accommodate for fluctuating water depth.