Mitlyng's Trapbedders allow you to pack dirt inside the jaws of traps with confidence. The bedders support the pan, not allowing the trap to fire. Model 1 is for # 1 1/2 through #3 longsprings and # 1 1/2 and #1 3/4 coilsprings. Model 2 is for #4 longsprings and #2 and #3 coilsprings. Model 3 works with various other traps.

The handles of these Coil Spring Trap Setters slip over the traps' levers giving you extra leverage when setting strong springed traps. These setters work with all sizes of coilspring traps up to #4's.

Bridger Coil Spring Trap Setters give you extra leverage when setting coil spring traps. These setters work with coil spring traps from #1's all the way up through #5's.

Maine Style Coil Spring Trap Setters are specifically made for setting coil spring traps from #1.65 and above. There is a slot cut in each of the metal plates on the end of the setter handles. The Maine Style setters are used as a pair, one fitting on each trap lever on opposing sides of the trap. Center each trap lever within the slot and then draw the Maine setter handles together. This depresses each lever to a point where the jaws fall open, allowing you to set the trap. You can also hold the set trap in one hand utilizing the setter handles.

Step Down #5 Long Spring Trap Setters are very easy to use. Simply "step down" on the setters and both springs are depressed at the same time. These setters are very handy for removing a beaver from a #5 long spring trap.

The Freedom Brand Dog Proof Trap Setter makes it easier to compress the springs on the Freedom Brand FB2, Duke DP, Ztrap, Coon Dagger, Bridger T3 and Lil' Grizz Get'rz.

The Dog Proof Trap Setter makes it easier to compress the springs on the Duke DP, Ztrap, Coon Dagger, Bridger T3 and Lil' Grizz Get'rz traps.

You can easily set the MB-650 with your two hands. Set traps while sitting or standing. Knee deep snow, mud or water? No problem with these new and improved MB-650 Trap Setters.

Makes setting MB-750's easy. Setters go under springs and against levers.

Duke 850 Trap Setters are custom designed to set the Duke 850 traps.

NO-BS Coil Spring Trap Setters are available in 3 different models. These cradle style setters give you extra leverage when setting NO-BS coil spring traps.

TS-85 Trap Setters are custom designed for setting the TS-85 Beaver trap.

WCS Pro 7.5 Setters make setting the WCS Pro 7.5 Beaver trap very easy and simple. They fit on the wire levers and are then depressed for engaging the dog onto the pan. They are made of heavy duty, flat metal bar that acts as a handle with a metal angle welded onto it which engages the underside of the wire lever. The WCS Pro 7.5 setters can also be used to set the J.C. Conner "Jake Trap" and the CDR 7.5 Beaver trap.

Freedom Brand Steel Body Grip Setting Tongs are available in three sizes. The small setter is 14" long and is designed for use with #50, #60, #110, #120 and #160 sized body grip traps. The medium setter is 21" and is designed for use with #160 and #220 sized body grip traps. The large setter is 29" long and is designed for use with #220, #280 and #330 sized body grip traps. Freedom Brand Steel Body Grip Setting Tongs are wider at the pivot point to reduce spread and to increase longevity. The small setters are made of 9/16” steel that widens out to 13/16” at the pivot point. The medium setters are made of 1” steel that widens out to 1 1/4” at the pivot point. The large setters are made of 1” steel that widens out to 1 1/4” at the pivot point.

Freedom Brand Quick Grip Steel Body Grip Setting Tongs have an added outside handle to make setting body grip traps quicker and easier. By using the outside handle when compressing the setting tongs the inside handle will come even with the handle of the other side so that you can easily then grasp both handles with your other hand. This makes the handle transfer process easy and you can then reach down with your free hand to flip the latch over the spring. Freedom Brand Quick Grip Steel Body Grip Setting Tongs are available in two sizes. The medium setter is 21" and is designed for use with #160 and #220 sized body grip traps. The large setter is 29" long and is designed for use with #220, #280 and #330 sized body grip traps. Freedom Brand Quick Grip Steel Body Grip Setting Tongs are wider at the pivot point to reduce spread and to increase longevity. Both the medium and large setters are made of 1” steel that widens out to 1 1/4” at the pivot point.

Freedom Brand Aluminum Body Grip Setting Tongs are 24" long and can be used to set all sizes of body grip traps from #110’s up through #330’s. These setting tongs are made of 1” x 3/8” aluminum and weigh only 28 oz.

The Self Locking Body Grip Setter is excellent for use in setting all sizes of body grip traps.

The RTS Trap Setter is a very effective tool for setting springs on all body grip traps. This setter can be used with only one hand. It is 15" long and weighs approximately 2 lbs.

The Sleepy Creek No. 3 Body Grip & Long Spring Setting Tongs are 14" long. These aluminum setting tongs weigh only 10 oz., and will set 110, 120 and 160 sized body grippers plus #11 through #2 long springs.

Sleepy Creek No. 4 Body Grip & Long Spring Setting Tongs are 24" long. They are made of aluminum and can be used to set body grippers up thru the #330 size and long springs up through the #5 size. The model 4 has 2 U-clips, one for the smaller long springs and one for the #4 and #5 long springs. Weighs only 24 oz.

The Gem Body Grip Trap Setter is used by placing the setter on the ground, inserting the spring of a body grip trap into the setter guides, and then pulling up on the setter handle. Easy method for closing and latching the springs of body grip traps.