This handy Trap Pan Adjuster fits all coil spring and long spring traps. You can use it to bend the cross frame of the trap where the dog attaches towards the center of the trap to lower the pan or away from the center of the trap to raise the pan. This great new tool is much easier to use than a flat head screw driver and it gives a much more uniform bend to the cross frame.

The Trap Jaw Tool helps you remove and install trap jaws. This is the tool used in Charles Dobbins' Traps, Equipment and Modifications video.

The Coil Spring Tool is a handy device that makes it easier to insert spring ends behind the levers when modifying coil spring traps.

Sullivan's Trap Tester easily and accurately measures the pan tension on foothold traps. Graduated from 1 pound to 4 pounds in one pound increments.

The #14 Drill Bit is used to drill the pan post and pan shank of new traps so that they will accommodate a #10 bolt. This takes the "pan slop" out of factory traps.

Bob Custer's Trapper's Bender mounts in a vise and allows you to make J-Hooks, S-Hooks, base plates and Sterling type swivels out of 20 penny nails. It is very easy to use and comes with easy to follow instructions.

This Heavy Duty J-Hook Tool is ideal for opening and closing J-Hooks. This tool also works well on some styles and sizes of S-Hooks.

These 6" Trapper's Pliers have side cutters and flat jaws. Many uses for land lines, water lines and snare lines.

This Leather Sheath accomodates trapper's pliers and other similar sized tools.

The Standard S-Hook & Rivet Tool is used for opening and closing S-Hooks and J-Hooks.

The Heavy Duty S-Hook Tool is 14" long and is excellent for use in opening and closing S-Hooks.

These Standard Cable Cutters give you good clean cuts on cable up to 3/32" in size. They have spring loaded handles and are great for use as an economical cutter on the line or in the shop.

HIT Heavy Duty Cable Cutters have spring action handles for fast cutting and will handle cable up to 3/16". Excellent cable cutters at a very reasonable price.

The Swiss C-7 Cable Cutter are durable, spring action cable cutters that will accomodate cable up to 3/16".

This quality made leather holster will accomodate the Standard Cable Cutters, the Swiss C-7 Cable Cutters and the ARM Sangyo Heavy Duty Cable Cutters as well as other similar sized tools.

Wire Reelers are a big time saver for trappers and snaremen. These wire reelers are available in orange plastic or cast metal. They accommodate the standard 3 1/2 lb. rolls of 14 gauge and 16 gauge wire.

This Chain & Bolt Cutter is excellent for cutting chain, S-Hooks, J-Hooks and wire.

These Standard Hand Swage Tools are ideal for crimping/swaging aluminum fittings. The small model is 14" long and does 1/16" to 1/8" stops and double ferrules. The large model is 24" long and does 1/16" to 1/8" stops and double ferrules. You can use these swagers "free hand" in the field, or mount them in a vise grip and use as a bench swager.

The Standard Bench Mount Swager has multi-compression TekLock jaws to swage 1/16", 5/64", 3/32" and 1/8" aluminum double ferrules and aluminum stops. This swager bolts to your work bench and is good for mass production of snares, drowner slides, cabled stakes, snare extension cables, etc.

The Beefer Level Set Tool facilitates the lowering of the loose jaw on traps with Beefer spring kits installed.