The #11 Newhouse Double Jaw Double Long Spring Trap has a 4" jaw spread, and is recommended by Oneida Victor for use in taking mink, muskrat, opossum, raccoon and skunk.

You can easily set the MB-650 with your two hands. Set traps while sitting or standing. Knee deep snow, mud or water? No problem with these new and improved MB-650 Trap Setters.

Makes setting MB-750's easy. Setters go under springs and against levers.

Taos Lightning Spring 4-Coil Kit #1 made by J.C. Conner fits: #1 1/2 Northwood Round & Square Jaw, #1 3/4 Northwood Round & Square Jaw, #1.75 Victor Pro 2x2 and #1.65 Bridger. Each kit includes the spring, longer heavy duty spring pin and lock.

Taos Lightning Spring 4-Coil Kit #2 made by J.C. Conner fits: #3 Duke, #3 Victor Round & Square Jaw (with 2 7/8" pin), #3 Victor Soft Catch and #4 Victor Coyote 2x2 (with 2 7/8" pin). Each kit includes the spring, longer heavy duty spring pin and lock.

Taos Lightning Spring 4-Coil Kit #3 made by J.C. Conner fits: #1 1/2 Victor, #1 1/2 Victor Soft Catch, #1 1/2 Duke, #1 1/2 Bridger and #1 1/2 Blake & Lamb. Each kit includes the spring, longer heavy duty spring pin and lock.

Taos Lightning Spring 4-Coil Kit #4 made by J.C. Conner fits: #1.75 Victor Pro, #1 3/4 Victor Round Jaw, #2 Victor Round Jaw, #1 3/4 Duke and #2 Duke. Each kit includes the spring, longer heavy duty spring pin and lock.

Taos Lightning Spring 4-Coil Kit #5 made by J.C. Conner fits: #2 Victor Square Jaw. Each kit includes the spring, longer heavy duty spring pin and lock.

Taos Lightning Spring 4-Coil Kit #6 made by J.C. Conner fits: #3 Victor Square Jaw (with 3-1/2" wide pin). Each kit includes the spring, longer heavy duty spring pin and lock.

Taos Lightning Spring 4-Coil Kit #7 made by J.C. Conner fits: #2 Northwood Square Jaw, #1 3/4 Bridger Round Jaw and #2 Bridger Round and Square Jaw (with 2-1/2" narrow pin). Each kit includes the spring, longer heavy duty spring pin and lock.

Taos Lightning Spring 4-Coil Kit #8 made by J.C. Conner fits: #3 Northwood and #3 Bridger (with 3" narrow pin). Each kit includes the spring, longer heavy duty spring pin and lock.

Taos Lightning Spring 4-Coil Kit #9 made by J.C. Conner fits: #1 1/2 Montgomery Round & Square Jaw and #1 1/2 Montana Special. Each kit includes the spring, longer heavy duty spring pin and lock.

Taos Lightning Spring 4-Coil Kit #10 made by J.C. Conner fits: #2 Montgomery Round & Square Jaw (with 2-5/8" narrow pin). Each kit includes the spring, longer heavy duty spring pin and lock.

Taos Lightning Spring 4-Coil Kit #11 made by J.C. Conner fits: #2 Montgomery Round & Square Jaw and #2 Bridger Round & Square Jaw (with 2-7/8" wide pin). Each kit includes the spring, longer heavy duty spring pin and lock.

Taos Lightning Spring 4-Coil Kit #12 made by J.C. Conner fits: #3 Montgomery, #3 Montana Special and #3 Northwood (with 2-1/2" old narrow pin). Each kit includes the spring, longer heavy duty spring pin and lock.

Taos Lightning Spring 4-Coil Kit #13 made by J.C. Conner fits: #4 Montgomery, #3 Herter and #4 Sleepy Creek. Each kit includes the spring, longer heavy duty spring pin and lock.

Taos Lightning Spring 4-Coil Kit #14 made by J.C. Conner fits: #3 Bridger (with 3-1/2" wide pin). Each kit includes the spring, longer heavy duty spring pin and lock.

Taos Lightning Spring 4-Coil Kit #15 made by J.C. Conner fits: #1 1/2 Sleepy Creek (solid and t-jaw) and #1 3/4 Sleepy Creek (solid and t-jaw). Each kit includes the spring, longer heavy duty spring pin and lock.

D-Ring Base Plate Kit #1 by J.C. Conner is 3/16" x 3/4" x 4 1/2" and fits: #1 1/2 Victor, # 1 1/2 Duke, #1 1/2 Northwood, #1 1/2 Montgomery, #1 1/2 Montana Special, #1 1/2 Bridger, #1 1/2 Sleepy Creek, #1 3/4 Northwood and #1 3/4 Sleepy Creek.

D-Ring Base Plate Kit #2 by J.C. Conner is 3/16" x 3/4" x 4 7/8" and fits: #1.65 Bridger, #1.75 Victor, #1 3/4 Duke, #2 Victor, #2 Duke and #2 Herter.

D-Ring Base Plate Kit #3 by J.C. Conner is 3/16" x 3/4" x 5 7/16" and fits: #2 Bridger and #3 Herter.

D-Ring Base Plate Kit #4 by J.C. Conner is 3/16" x 1" x 5 3/16" and fits: #3 Victor Double Long Spring.

D-Ring Base Plate Kit #5 by J.C. Conner is 3/16" x 1" x 5 1/2" and fits: #2 Bridger, #2 Montgomery and #2 Northwood.

D-Ring Base Plate Kit #6 by J.C. Conner is 3/16" x 1" x 5 13/16" and fits: #3 Montgomery, #3 Montana Special, #3 Sleepy Creek and #4 Victor Double Long Spring.

D-Ring Base Plate Kit #7 by J.C. Conner is 3/16" x 1" x 6 3/8" and fits: #3 Victor, #3 Bridger, #3 Duke, #3 Northwood, #4 Montgomery, #4 Herter and #4 Sleepy Creek.

D-Ring Base Plate Kit #8 by J.C. Conner is 3/16" x 1" x 6 15/16" and fits: #5 Bridger and #44 Blake & Lamb.

MB Pre-Formed Lamination Kit #1 contains 24 rods which are 3 3/4" long and fit the following coil spring traps: #1 1/2 Victor, #1 1/2 Duke, #1 1/2 Sleepy Creek, #1 1/2 Northwood (Round Jaw), #1 1/2 Montana Special, #1 1/2 Bridger, #1.75 Victor, #2 Victor, #1 3/4 Duke, #2 Duke, #2 Montgomery (Round Jaw), #1 3/4 Sleepy Creek and #1 3/4 Northwood (Round Jaw). Each kit comes with 24 rods -- the amount needed to laminate the jaws of 12 traps. These rods are made to be welded to traps' jaws.

MB Pre-Formed Lamination Kit #2 contains 24 rods which are 3 1/2" long and fit the following coil spring traps: #1 1/2 Montgomery (Round Jaw) and #1.65 Bridger (Round Jaw). Each kit comes with 24 rods -- the amount needed to laminate the jaws of 12 traps. These rods are made to be welded to traps' jaws.

MB Pre-Formed Lamination Kit #4 contains 24 rods which are 3" long and fit #1 1/2 and #1 3/4 square jaw coil spring traps. Each kit comes with 24 rods -- the amount needed to laminate the jaws of 12 traps. These rods are made to be welded to traps' jaws.

MB Pre-Formed Lamination Kit #5 contains 24 rods which are 5" long and fit the following coil spring traps: MB-650, #3 Victor and #3 Duke. Each kit comes with 24 rods -- the amount needed to laminate the jaws of 12 traps. These rods are made to be welded to traps' jaws.

MB Pre-Formed Lamination Kit #6 contains 24 rods which are 3 1/2" long and fit #2 square jaw coil spring traps. Each kit comes with 24 rods which is the amount needed to laminate the jaws of 12 traps. These rods are made to be welded to traps' jaws.

MB Pre-Formed Lamination Kit #7 contains 24 rods which are 4" long and fit #3 and #4 square jaw coil spring traps. Each kit comes with 24 rods -- the amount needed to laminate the jaws of 12 traps. These rods are made to be welded to traps' jaws.

MB Pre-Formed Lamination Kit #11 contains 24 rods which are 4 1/2" long and fit the following coil spring traps: #2 Northwood (Square Jaw) and #2 Bridger (Square Jaw). Each kit comes with 24 rods -- the amount needed to laminate the jaws of 12 traps. These rods are made to be welded to traps' jaws.

MB Pre-Formed Lamination Kit #12 contains 24 rods which are 5" long and fit the following coil spring traps: #3 Northwood (Square Jaw) and #3 Bridger (Square Jaw). Each kit comes with 24 rods -- the amount needed to laminate the jaws of 12 traps. These rods are made to be welded to traps' jaws.

Lap-Links have many uses. When used on the end of trap chain for staking purposes, the larger Lap-Links are for 1/2" stakes and the smaller Lap-Links are for 3/8" stakes. By using two Lap-Links on your trap chain you can cross stake at your set for better holding power.

Barker's Mink Pans are sold in dozen packs. Buck mink travel long distances so that many times you only have one chance to catch them. Barker's Mink Pans fasten onto the trap pans to increase the pan size. By using the Mink Pan you greatly increase the chances of the foot hitting the pan. Extensive trapline tests showed that through the use of the Mink Pan the mink catch increased by 80%. Barker's Mink Pans are sold in 2 styles:Mink Pan I is for use with #1 and #11 traps.Mink Pan II is for use with #1 1/2, #1 3/4 and #2 traps.

J.C. Conner T-Bar Shock Springs keep the stake from being pumped out of the ground and decrease the shock to the animal. Die cut 3/16" thick T-Bar with 1/4" hole to allow for easy hook-up. Approximately 75 lb. pull.

Heavy Duty 6 Gauge J-Hooks are used with in-line and stake swivels.

MB Crunch Proof In-Line Swivels are the heaviest and smoothest operating swivels ever offered to the trapper. The body of the swivel is much thicker than multi-purpose swivels, making it virtually impossible for coyotes or other large animals to close the swivels. Each swivel comes with two 6 Gauge J-Hooks. Strong enough for the toughest wolf, wolverine, bear or mountain lion if the J-Hooks are welded.

These Flat Stake Swivels work with 1/2" and 3/8" stakes. Each Flat Stake Swivel comes with a 6 Gauge J-Hook.

Double Stake Swivels make it easy for you to use two stakes at a set. Each Double Stake Swivel comes with a 6 Gauge J-Hook for attachment to your trap's chain.

The Coil Spring Tool is a handy device that makes it easier to insert spring ends behind the levers when modifying coil spring traps.

The #14 Drill Bit is used to drill the pan post and pan shank of new traps so that they will accommodate a #10 bolt. This takes the "pan slop" out of factory traps.

Sullivan's Trap Tester easily and accurately measures the pan tension on foothold traps. Graduated from 1 pound to 4 pounds in one pound increments.

Red Powder Logwood Trap Dye turns traps black. Approximately 1 bag is needed for every 5 gallons of water. Directions are included with each bag. Packaged in 1 lb. bags.

Black Powder Trap Dye turns traps a dark blue-black. Each 10 gallons of water requires approximately 1 bag of dye. Directions for use are written on the bag. Packaged in 1 lb. bags.

Speed Dip is mixed with gasoline or lantern fuel to produce a lasting, protective coating on traps. Speed Dip works well for water traps and land traps, and usually takes 2 to 4 days to dry.

Formula One Trap Kote is mixed with water to produce an excellent finish for both traps and snares. Formula One dries in a day or so, provides excellent protection for traps and deodorizes both traps and snares.

Pete's Sleepy Creek Liquid Trap Dye does a nice job of dyeing traps. One 8 oz. bottle should be mixed with five gallons of water, and traps should be boiled in this solution to produce an odor free and protective finish.

Pete Rickard's Natural Wood Trap Dye Liquid Concentrate produces a dark, protective coating on traps. Traps should be boiled in solution containing 3 gallons of water for every 4 oz. bottle of dye.