J.C. Conner "Jim Digger" Steel Trowels measure 23 inches in length. Choose from narrow 2-1/2" or wide 3" blades. All steel construction to stand up to rugged trapline use.

The J.C. Conner "Sod Devil" Steel Hoe measures 19 inches in length. All steel construction to stand up to rugged trapline use.

The J.C. Conner "The Badger" Steel Digger is two diggers in one. Length is 27 inches. All steel construction to stand up to rugged trapline use.

This Replacement Woden D-Handle is a durable handle that will take heavy use on your trapline. Comes with bolts/nuts for installation.

The "A" sized Underalls are for #1 1/2 Victor, Sleepy Creek, Blake & Lamb, Montana and Montgomery round pan traps. 24 pads per pack.

The "B" sized Underalls are for Victor #1.75 and #2, MB-450-FH and MB-550-RC. 24 pads per pack.

The "C" sized Underalls are for square pan traps. 24 pads per pack.

These Snare Extension Cables are constructed of 3/32" 7x7 galvanized aircraft cable. They are available by the dozen in 3', 6' and 10' lengths. One end has a double ferrule closed loop. The other end has a double ferrule closed loop with an S-Hook for attaching to your snare. These Snare Extension Cables are designed for securing a snare to a tree or post by looping the extension around the tree or post, feeding the end with the S-Hook through the other looped end and then crimping the S-Hook to the snare.

These 3/32" Drowners/Slides are constructed of 3/32" 7x7 galvanized aircraft cable. They are available in 6', 8' and 10' lengths. Both ends on each drowner/slide have adjustable loops, and come equipped with a drowner lock. These drowners/slides are excellent at drowning sets for raccoon, mink and muskrat and for sliding catches out of sight when land or water trapping.

These 1/8" Drowners/Slides are constructed of 1/8" 7x7 galvanized aircraft cable. They are available in 6', 10', 16' and 24' lengths. Both ends on each drowner/slide have adjustable loops, and come equipped with a drowner lock. These drowners/slides are excellent at drowning sets for beaver, otter and raccoon and for sliding catches out of sight when land or water trapping.

These Break-Away J-Hooks are available with a break away rating of 285 lbs. or 350 lbs. They are designed to retain targeted furbearers in snares, but to release larger animals.

These Break-Away S-Hooks have a break away rating of 285 lbs. They are designed to retain targeted furbearers in snares, but to release larger animals.

These Squeeze-On Deer Stops can be added to already completed snares, and fit all cable sizes.

These Standard Deer Stops are for application during the snare manufacturing process. Please be sure to specify the correct size from the pull-down menu when ordering as these standard deer stops come cable size specific.

These 3/16" annealed non-cracking nuts make excellent Steel Cable Ends for all cable up to 1/8".

These Short Drowner Locks are best used for smaller animals like mink, raccoon and muskrat. These drowner locks will not back up and are for use with wire or cable.

These Long Drowner/Slide Locks are for use as drowners in water situations and on cable slide wires in land situations. Long drowner/slide locks are best used for larger animals like beaver, otter, coyote and raccoon. These drowner/slide locks will not back up and are for use with wire or cable.

These Pig Tail Supports are made of 9 gauge wire. They can be bent to any position to allow you to hang your snare exactly where you want it. The support end slips into the support collar on your snare to hold the snare loop in place. The other end slips over a rebar stake, and the tail sticks in the ground for stabilization. They can also be spot welded to kill poles. Sold by the dozen.

Mighty Hooks are made of tempered 3/16" steel. The Mighty Hook is a strong S-Hook that has many uses.

The Cam Snare Lock is a fast, resuable snare lock that won't slip. Please be sure to specify the correct size from the pull-down menu when ordering as these snare locks come cable size specific.

The ADC Washer Snare Lock is relaxing and approved in many states with cable restraint requirements. This snare lock is preferred by many animal damage control professionals, and will work on 3/32" and 5/64" cable.

The Heavy Duty Relaxing Washer Snare Lock has a 1 1/4" diameter, and will work on 1/16", 5/64" and 3/32" cable. It also works well as a drowner slide lock.

The Small Washer Snare Lock is a penny sized, smooth sliding, relaxing snare lock. Please be sure to specify the correct size from the pull-down menu when ordering as these snare locks come cable size specific.

Snare Support Collars, or Wammys, provide excellent support when using support wire to hang snares. They reduce snare set up time. These support collars are for use with #9 gauge wire, and must be put on the snare during the manufacturing process. They can not be added to the snare after it is made. Please be sure to specify the correct size from the pull-down menu when ordering as these snare support collars come cable size specific.

Snare Support Collars, or Wammys, provide excellent support when using support wire to hang snares. They reduce snare set up time. These support collars are for use with #11 gauge wire, and must be put on the snare during the manufacturing process. They can not be added to the snare after it is made. Please be sure to specify the correct size from the pull-down menu when ordering as these snare support collars come cable size specific.

These Snare Swivels are designed for use with 1/2" stakes and most larger washer 3/8" stakes. Their square design provides excellent swiveling action. They are available in two sizes. The heavier 9 gauge snare swivels are more commonly used for snaring coyotes and other larger animals.

Snare Swivel Washers are for use with snare swivels to ensure good swiveling action.

The Standard S-Hook & Rivet Tool is used for opening and closing S-Hooks and J-Hooks.

These Rebar Stakes are available in 18", 24" and 30" lengths by the 1/2 dozen or the dozen. They are designed for use for land trapping and are constructed of 1/2" rebar with a heavy duty flat washer welded to the top and an angle-cut bottom. These stakes are designed to be hammered into the ground.

These T-Bar Stakes are available in 18", 24", 30" and 36" lengths by the 1/2 dozen or the dozen. They are designed for use for water trapping and are constructed of 3/8" rebar with a 4" length of rebar welded to the top and a pencil point ground bottom. These stakes are designed to be pushed into the ground.

Standard Berkshire Disposable Stake Ends are designed for normal soil conditions. Attach to wire or cable and these stakes are ready to go.

Standard Berkshire Disposable Stakes are designed for normal soil conditions. These stakes come already attached to 15" cable and are ready to be used.

Heavy Duty Berkshire Disposable Stake Ends are designed for harder ground. Attach to wire or cable and these stakes are ready to go.

Heavy Duty Berkshire Disposable Stakes are designed for harder ground. These stakes come already attached to 15" cable and are ready to be used.

Soft Ground Berkshire Disposable Stake Ends are designed for water trapping, particularly in marshes and any soft mud situation. Attach to wire or cable and these stakes are ready to go.

Soft Ground Berkshire Disposable Stakes are designed for water trapping, particularly in marshes and any soft mud situation. These stakes come already attached to 30" cable and are ready to be used.

This 3/8" x 24" driver is made for Berkshire Disposable Stakes.

This 46" Heavy Duty Stake Puller gives you the needed leverage to pull earth anchors and rebar stakes. Just lay the stake puller on the ground, attach the hook to your cable end or chain and lift.

The 2-Prong 1/4" Trap Drag is a smaller drag made of 1/4" steel best suited for fox and raccoon. This drag is approximately 7" long and 9" wide. Hook to your trap chain with a large S-Hook, split ring or lap link.

The 2-Prong 3/8" Trap Drag is a larger drag made of 3/8" steel best suited for coyote and bobcat. This drag is approximately 10" long and 10" wide. Hook to your trap chain with a large S-Hook, split ring or lap link.

The #50 Victor Single Spring Conibear Trap has a 3 1/2" x 4 1/2" jaw spread, and is recommended by Oneida Victor for use in taking mink, muskrat and weasel.

The #60 Victor Double Spring Conibear Trap has a 3 1/2" x 4 1/2" jaw spread, and is recommended by Oneida Victor for use in taking mink, muskrat and weasel.

The #110 Victor Single Spring Conibear Trap has a 4 1/2" x 4 1/2" jaw spread, and is recommended by Oneida Victor for use in taking mink, muskrat and weasel.

The #120 Victor Double Spring Conibear Trap has a 4 1/2" x 4 1/2" jaw spread, and is recommended by Oneida Victor for use in taking marten, mink, muskrat, opossum, raccoon and skunk.

The #160 Victor Double Spring Conibear Trap has a 6" x 6" jaw spread, and is recommended by Oneida Victor for use in taking fisher, marten, opossum, raccoon, nutria and skunk.

The #220 Victor Double Spring Conibear Trap has a 7" x 7" jaw spread, and is recommended by Oneida Victor for use in taking badger, beaver, fisher, marten, nutria, opossum, otter, raccoon and skunk.

The #280 Victor Double Spring Conibear Trap has an 8" x 8" jaw spread, and is recommended by Oneida Victor for use in taking beaver, bobcat, lynx and otter.

The #330 Victor Double Spring Conibear Trap has a 10" x 10" jaw spread, and is recommended by Oneida Victor for use in taking beaver, bobcat, lynx and otter.

The #110 Bridger Magnum Single Spring Body Grip Trap has a 4 1/2" x 4 1/2" jaw spread, and is recommended by Bridger for use in taking muskrat, mink, moles and other small animals.

The #120 Bridger Magnum Double Spring Body Grip Trap has a 4 1/2" x 4 1/2" jaw spread, and is recommended by Bridger for use in taking marten, muskrat, mink and other small animals.